Reassessment of the Ocean-To-Atmosphere Flux of Carbon Monoxide

Carbon monoxide (CO) in the surface sea waters is produced predominantly by photochemical processes, oxidized by micro-organisms and outgassed to the atmosphere. to assess carbon monoxide flux from the oceans to the atmosphere, the photochemical production and microbial oxidation of carbon monoxide in the oceanic mixed-layer was investigated during several oeanographic cruises and in the laboratory. the photoproduction rate of carbon monoxide was found to be well correlated to the concentration of dissolved organic carbon (DOC) in coastal and open ocean surface waters. Taking a global average carbon monoxide production rate of 10 ± 2 nmole litre^-1 (mg DOC hr)^-1 in the surface open ocean water, and 25 ± 7 nmole litre^-1 (mg DOC hr)^-1 in coastal sea water, at cloud-free summer solar noon, the photochemical production of carbon monoxide in the global oceans is estimated to be at a rate of 1200 ± 200 Tg CO y^-1. the microbial carbon monoxide turnover time in the mixed-layer was observed to range from hours in a coastal estuary to 16 days in the Pacific along 1057deg; W in dark incubations. Natural sunlight can largely inhibit the microbial consumption of carbon monoxide in surface water. On a global scale, microbial consumption is responsible for the loss of less than 10% of photochemical produced carbon monoxide in the surface ocean. Field measurements have shown that the net transport of carbon monoxide from the euphotic zone to the underlying deeper ocean water is limited and that the overall life time in surface sea waters is less than 3-4 hours. When combined, these field measurements with the photoproduction and microbial consumption rates obtained, we estimate the oceanic flux to the atmosphere is about 1000 ± 200 Tg CO y^-1, which represents the largest single source of atmospheric carbon monoxide.     

室内空气有机污染的研究现状

主要讨论了室内空气中有机物污染的研究现状。重点介绍了室内空气中多环芳烃 (PAHs)、挥发性有机物(VOCs)、醛类化合物等的污染状况及来源。简要叙述了室内空气污染的影响因素及对人体的健康风险评价。     

含氯代烃废水的生物毒性与处理方法探讨

卤代烃是在有机物分子中的碳原子上，用卤素基团取代出氢的卤化产物，这个变化使有机物的生物毒性增大，这是卤素有机态毒性的体现；另一方面，卤代烃在生物水解或降解过程中，又会重新释放出带正电荷的卤素，与水结合后成为次卤酸而具有无机态卤素的生物毒性。作者在提出这种卤代烃生物毒性学说的基础上，提出了一系列在含卤代烃废水预处理与生物处理中的解毒、降毒、抗毒和减荷及提高可生化性的措施，以提高含卤代烃废水的综合处理效率。     

Atmospheric particle characterization, distribution, and deposition in Xi'an, Shaanxi Province, Central China

Physical characterization and chemical analysis of settled dusts collected in Xi’an from November 2007 to December 2008 show that (1) dust deposition rates ranged from 14.6 to 350.4 g m⁻² yr⁻¹. The average deposition rate (76.7 g m⁻² yr⁻¹) ranks the 11th out of 56 dust deposition rates observed throughout the world. The coal-burning power was the major particle source; (2) on average (except site 4), ∼10% of the settled dusts having size <2.6, ∼30% having size <10.5, and >70% having size <30 μm; (3) the concentrations for 20 out of 27 elements analyzed were upto 18 times higher than their soil background values in China. With such high deposition rates of dusts that contain elevated levels of toxic elements, actions should be taken to reduce emission and studies are needed to assess the potential impacts of settled particles on surface ecosystem, water resource, and human health in the area.     

Effects of the organic matter from swine wastewater on the adsorption and desorption of alachlor in soil

The application of swine wastewater to the soil for agricultural purposes results in the addition of total and dissolved organic matter to the soil, which may interfere with the dynamics of pesticides in the soil. The objective of this study was to evaluate the effects of the application of total and dissolved organic matter from a biodigester and a treatment lagoon of swine wastewater in the adsorption and desorption of alachlor [2-chloro-2,6-diethyl-N(methoxymethyl acetamide)]. The assay was performed by the batch equilibrium method, and the results were fitted to the Freundlich model. The curve comparison test revealed a greater adsorption of alachlor in the soil treated with swine wastewater from the biodigester. The adsorption and desorption of alachlor increased in the soils where swine wastewater was added, and hysteresis was observed in all of the treatments.     

MBR工艺中溶解性有机物的分子量和EEM解析

采用凝胶过滤色谱(GFC)分子量测定技术和三维荧光(EEM)光谱技术,对平板膜-生物反应器工艺应用于餐饮废水和粪便污水处理的工程实例进行研究,对比分析2套工艺中的调节池水和出水的溶解性有机物(DOM)及污泥胞外聚合物(EPS)的性质变化.研究表明,餐饮废水处理过程的调节池水DOM中大分子(＞100 kDa)物质比例为6...     

摇动床生物膜反应器和活性污泥法组合技术处理高浓度有机废水的研究

利用摇动床生物膜反应器(简称摇动床)技术具有的容积负荷高与污泥产量低的优点,在普通活性污泥池的前部填充高性能丙烯酸树脂纤维(Biofringe)填料,研究了摇动床和活性污泥法组合技术处理高浓度有机废水的有效性。结果表明,该组合技术具有很强的有机物去除能力,当进水COD平均质量浓度由1500mg/L上升到2514mg/L时,出水COD的平均去除率基本保持在96%以上;整个运行阶段的出水COD浓度均满足《污水综合排放标准》(GB8978—1996)的二级标准;当进水NH4+-N浓度增加时,NH4+-N的去除率由99.7%降低到76.5%,但是在试验运行的整个阶段,摇动床和活性污泥法组合技术系统都表现出较强的硝化能力;活性污泥池中最高的混合液悬浮固体(MLSS)质量浓度为10625mg/L,最高MLSS约为普通活性污泥法的4倍;运行结束后的污泥产率为0.186,污泥产率仅为普通活性污泥法的50%左右。     

生物倍增工艺同步脱氮除磷强化途径分析

通过对生物倍增工艺处理市政污水的沿程污染物降解规律的考察表明,工艺对有机物的去除效果显著,COD和BOD5出水分别为47.80 mg/L和19.80 mg/L;氨氮去除率可达100%。发现厌氧区提前发生反硝化并一定程度上影响系统除磷效果;通过对各主要影响因素进行分析,认为低碳源的进水条件是影响系统同步脱氮除磷效果的关键因素;提出在进水口直接添加碳源以及分点进水的碳源分配＋辅助化学除磷的方式可强化氮磷去除效果。     

燃煤锅炉湿式脱硫除尘一体化设备的综合分析

本文对湿式脱硫除尘一体化设备的结构和性能进行了较为全面的分析,指出了该设备存在的诸多弊病,提出了解决方案--脱硫、除尘分体组合式的思路.     

Low cost measurements of nitrogen and sulphur dry deposition velocities at a semi-alpine site: gradient measurements and a comparison with deposition model estimates

The conditional time averaged gradient method was used to measure air-surface exchange of nitrogen and sulphur compounds at a semi-alpine site in Southern Norway. Dry deposition velocities were then obtained from the bi-weekly concentration gradient measurements. Annual deposition velocities were found to be 1.4, 11.8 and 4.0 mm s(-1) for NH3, HNO3 and SO2, respectively, if all data were included, and to be 10.8, 11.8 and 13.0 mm s(-1), respectively, if only positive values were included. Measured deposition velocities were compared to two sets of values estimated from a big-leaf dry deposition module applying to two different land types (short grass and forbs, and tundra), driven by measured micrometeorological parameters. The deposition module gives reasonable values for this site throughout the year, but does not reproduce the large variability as shown in the measured data. No apparent seasonal variations were found from either measurements or module estimates due to the very low productivity of the studied area.